Embroidery hoop size chart
The Janome Memory Craft 550E stitches a maximum embroidery field of 7.9 x 14.2 inches (200 x 360 mm). The 500E's bigger sibling. The RE36b hoop with magnetic clips takes the field to 7.9 x 14.2 inches.
Maximum field
7.9 x 14.2 in
In millimeters
200 x 360 mm
Needles
1 (single-needle)
Checked against the field in either orientation, with the design sizes embroiderers usually quote. A design that fills the field edge to edge needs a size down or the next machine up, because you still want room for a basting box and for nudging placement.
The field of each hoop, as Janome publishes it. Use the smallest hoop the design fits; a hoop close to the design's size holds the fabric tighter.
| Hoop | Field (in) | Field (mm) | Included |
|---|---|---|---|
| RE36b | 7.9 x 14.2 | 200 x 360 | Yes |
| SQ20b | 7.9 x 7.9 | 200 x 200 | Yes |
| RE20b | 5.5 x 7.9 | 140 x 200 | Yes |
| SQ14b | 5.5 x 5.5 | 140 x 140 | Yes |
| RE28b | 7.9 x 11 | 200 x 280 | Optional |
| ASQ18b | 7.2 x 7.2 | 180 x 180 | Optional |
| RE10b | 1.5 x 5.5 | 40 x 100 | Optional |
Read from janome.com, Memory Craft 550E product page on September 24, 2026. If Janome changes the spec, that page wins over this one. The full chart of every machine and hoop we have verified, with a will-it-fit checker, is the embroidery hoop size chart.
Once you know the design fits, the embroidery pricing calculator works out what to charge from the stitch count, the blank, hooping, and digitizing.
7.9 x 14.2 inches (200 x 360 mm). That is the field the needle can reach, which is smaller than the plastic hoop, and it is the number Janome publishes on the machine's own product page.
Not a finished cap. The Memory Craft 550E is a single-needle flatbed machine with no cap frame, so a hat has to be stitched flat before assembly or hooped as a flat panel. Cap frames are a multi-needle feature.
Only by splitting it in software and re-hooping between sections, lining them up with alignment stitches. It works, and every re-hoop is a chance for the sections to land slightly off. For paid work, quote designs that fit the field in one hooping, and price a split job for the extra handling.
No. The hoop is the plastic frame; the embroidery area is the region inside it the needle can reach, and it is always the smaller number. Every figure on this page is the field, not the frame.